Note:

LED strips of different lengths are equipped with solar panel controllers of different powers

0.5-2m Kit:  0.5m/ 1m/ 2m Strips with 1.3W 1200MAH solar panel controller

3-5m Kit: 3m/ 4m/ 5mStrips with 2.8W 2400MAH solar panel controller

6-10m Kit: 6m/ 7m/ 8m/ 9m/ 10m Strips with 6W 7200MAH solar panel controller

Specification:

-Item: Solar Powered COB LED Neon Strip

-Color Temperature: Warm white(3000K)/ Natural white(4000K)/ White(6000K)

-Lamp beads: COB

-LED Quantity: 320LEDs/M

-Working Voltage: DC24V

-Neon Light Size: 6x12mm(W5-6mm x H11-12mm)

-CRI(RA): ＞90

-Adhesive tape: No

-Cutting Size: every 5cm Can be cut at marked intervals

-Waterproof Rating: Led strip is IP65 Waterproof (Can be used Outdoors)

-Power Supply: Solar Powered / USB Powered

-2Pin (male) waterproof joint wire length: 1.2m

-Length: 0.5M / 1M / 2M / 3M / 4M / 5M / 6M / 7M / 8M / 9M / 10M

Feature:

Double-sided glowing (front and side lighting);

No dark area;

Good light transmission;

Good flexibility and cuttable;

Suitable for indoor and outdoor decoration.

Package Included:

-1x DC24V COB Neon LED Strip light with solar controller panel(Remote control not included)

Solar-Powered Light Instructions

1. Automatic Light & Charge Control (This product features a built-in light sensor):

1）During Daylight: The light will automatically turn OFF and the solar panel will charge the internal battery using sunlight.

2）At Dusk/Night: The light will automatically turn ON using the energy stored in the battery during the day.

2. Testing During Daylight:

If you need to check the Solar-Powered LED Strip Light during daylight hours.You must completely cover the solar panel (e.g., with thick cloth, or cardboard). Otherwise, the solar panel won't work to light up the LED strip.

The solar panel is covered with the item while use (simulating a dark environment), the light will switch on within a few seconds.

3. Charging via USB:

The solar panel is unaffected by light during charging the product using the USB cable (connected to a power adapter). There is no need to cover it to make the light work during the day.

Installation Tips:

1.Place the solar panel where it receives direct sunlight for maximum charging efficiency.

2. Ensure the solar panel is clean and free from shade (trees, buildings, etc.) for optimal performance.

0.5m/ 1m/ 2m LED Strip with 1.3W 1200MAH solar panel.

3m/ 4m/ 5m LED Strip with 2.8W 2400MAH solar panel.

6m/ 7m/ 8m/ 9m/ 10m LED Strip with 6W 7200MAH solar panel.