Dear Buyer:
This item is a non-customized product. We will ship your order within three days of receiving it.
For packages under 2 kg, we use Cainiao Logistics by default. For packages over 2 kg, we will assign you a high-quality shipping carrier. In case of force majeure, our customer service team will send you an email and in-site message—please pay attention to communications from our support team!

Product description:

Material: ABS+PC

Voltage: DC12V

Current: 30-60A

Power :360-750W

Cooling capacity: 2300W

Cooling Area: 8-10㎡

Heat capacity:800W

Refrigerant: R134A Included

Noise level: 53 dB (A).

Weight: 25kg.

Skylight opening size:

Length: 30~55cm (Left/Right, perpendicular to the vehicle's direction of travel)

Width: 22.5~45cm (Front/Rear, in the vehicle's
direction of travel)

Environmental requirements:conditions of ambient temperature -15～48℃

System pressure protection switch:

≥2.5MPa to close , 2.45MPa to restore (for

reference)

≤ 0.1 8MPa to close , 0.23MPa to restore (for

reference)

Feature:

1. DC variable frequency compressor (adjusts output power according to indoor temperature requirements, efficient and energy-saving, improves comfort)

2. Rapid cooling (2300W cooling capacity for rapid cooling)

3. Integrated cooling and heating (cooling in summer and heating in winter to solve seasonal problems)

4. High strength base plate+ABS shell (shaking does not break, high temperature does not deform, corrosion resistance)

5. Abundant air volume (internal unit air volume 380m ³/h)

【Heating & Cooling】RV Air Conditioner offers a 7900 BTU cooling capacity and a 3000 BTU heating

function, perfect for parking use. Enjoy comfort all year round, whether it's summer or winter.

【Parameters】Cooling Air volume is about 2300 W ; Heat Air Volume is 1000W; Power Consumption 960W, Rated Current 30-70A; Host Size: 666 *720 * 160 mm, Refrigerant R134A

【Applicable】12V Heating and Cooling Automotive Air Conditioning Portable RV Rooftop Air Conditioner Electric Parking Unit for Car Truck Van

Note:

1. When using an electric air conditioner when driving, the battery should be fully charged first, and the generator must be above 75A. Vehicles with less than 75A must pay attention to the battery storage on the dashboard when driving. Stop using the electric air conditioner as soon as the indication of low battery power appears.

When the generator is running and the voltage is high, the compressor controller will mistakenly think that the battery is fully charged, but in fact the battery has no electricity. When parking, the compressor controller will automatically control, will not cause battery feed. In addition, when the generator is less than 55A, there will be undervoltage, and the air conditioner will be turned on when it stops. (This is because the power in the battery has been used up, and when the engine speed is low, the point cannot keep up, resulting in undervoltage).

2. In order to maximize the performance of the electric air conditioner, it is recommended to install a set of power batteries of 200A or above and a generator of about 70A, which can be used for about 5 hours when it is very hot during the day and used for more than 10 hours at night. Electric air conditioner doesn't have any effect either!

3. The external unit of the electric air conditioner should be installed to avoid the exhaust pipe of the engine, so as not to cause the high temperature of the external unit. The distance between the back panel of the electric air conditioner and the cab should not be less than 10 cm to ensure that the condenser fan has sufficient airintake.

Installation steps

1. Clean the Window

2. Wrap Cotton Strip : Stick multiple sealing strips onthe roof according to the tilt andheight of the roof.

3. Wrap it Around: Repair the corners of thesealant strip to make it smooth.

4. Put the air conditioner on: Place the air conditioner onthe roof and adjust the positionso that the bottom of the airconditioneris tightly attached tothe sealing strip.

5. Adjust the Brace

6. Fixed brace: Install 4 screw pillars and fixthe fixing rod horizontally orvertically to the roof accordingto the size of the sunroof.

7. After the tie is fxed

8. Connect the pairharness line: The wiring harness is concealed inside the car.

9. Connect Power Supply: Connect the air conditioningpowerinterface and connect itto the car power supply.

10. Paste Sponge Strips

11. Secure Interior Panel

12. Test air conditioner effect: Turn on the air conditioner and use it normally.