1/5/10/25M 2:1 Black 1 2 3 5 6 8 10mm Diameter Heat Shrink Heatshrink Tubing Tube Sleeving Wrap Wire Sell DIY Connector Repair
SPECIFICATIONS
Brand Name: NONE
Certification: CE,NONE
Color: Black
Dielectric strength: 15 KV/mm
Feature: Durable /Flexible
Flammability: VW-1
Full Shrinkage Temp: ≥120°C
High-concerned chemical: None
Material: PE
Minimum Shrinkage Temp: ≥84°C
Model Number: Insulation Sleeving
Operating Temperature: -55°C to +125°C
Origin: Mainland China
Pressure: 1 KV
Product Name: Heat Shrinkable Sleeve / heat shrink tubing
Rated Voltage: 220V
Shrinkage Ratio: 2:1
Tensile strength: 10.4 Mpa
Type: Heat Shrinkable,Insulation tube
Usage 1: Insulation Protection
is_customized: Yes
1/5/10/25/50/100/200M Black Thermoresistant Heat Shrink Tube Wire Cable sleeve Heat Shrink Tubing Insulated Sleeving wire Connector Protector
Note:
1. Color maybe slightly different due to different monitor.
The above size is measured by hand, please allow slightly difference.
2.The tray shown in the picture is 200 meters. If you need the tray, please buy the length of 100 meters to 200 meters. There is no tray for any length within 100 meters. We cut it from the tray. Thank you
If you buy a 5m heat shrinkable tube,
We will cut the heat shrink tubing
And the packaging can only be wound up.
Our heat-shrinkable tubes have very good shrinkage,
so they can all be used normally.
If you need a whole plate of heat shrinkable tubing,
please buy 100 meters or 200 meters.
Please purchase with caution.
thank you very much
Product:Heat Shrink Tube With Glue
HEAT ACTIVATED ADHESIVE
Features:
* Creates a waterproof seal
* Greater tensile strength
* Resistant to stretch and vibration
* Zero halogen, polyolefin cross linking
*Flame retardant
*Low smoke generation if burning
2:1 SHRINK RATIO
* Recovers to 1/2 of its original diameter
* Stays flexible
WATERPROOF
* Connection is sealed from the elements
* Protection against wire corrosion
* Can be submerged under water
Specification:
Product Name: Heat Shrinkable Sleeve
Color: Black
Length:1/5/10/25/50/100/200meters
Heat shrink ratio: 2:1(will maximum shrink to 1/2 its supplied diameter)
Material: PE/Polyolefin
Operation Temperation: -55℃ to +125℃
Minimum shrink temperature: 70°C
Minimum fully recovery temperature: 100°C
Cadmium content: < 5 ppm
Lead content: < 10 ppm
Full Shrinkage Temp:230℉ maximum
Tensil strength: 10.4Mpa
Dielectric strength: 15 kV/mm
Rated Voltage: 220V
Pressure: 1(KV)
Flammability : VW-1
Feature:Durable/ Flexible
Adhesive: Hot Melt Adhesive Coated
Cutting method: Scissors or sharp knife
Usage: Insulating and protecting for components,interconnections,terminals,wire harness,Machine tool,machine building,electric control system etc.
Area: Electronic equipment,Household appliances,machine building,communication
Package:
1/5/10/25/50/100/200meters Heat Shrink Tube





